"Chris Brady" wrote in message
news:nfGqd.47$693.6@newsfe1-gui.ntli.net...
> Looking for a C mount adapter to interface Reichert Polyvar microscopes to
> a digital camera with 1/2" format sensor
>
> Thanks
>
> Chris
>
Try Diagnostic Instruments, they list adapters for a bunch of Polyvars.
I've used them in the past and they are excellent. (www.diaginc.com)

Kevin Cunningham
SMS

From:	Richard J Kinch
Subject:	Re: C mount adapter for Reichert Polyvar
Date:	Wed, 01 Dec 2004 13:44:59 -0600

Chris Brady writes:

> Looking for a C mount adapter to interface Reichert Polyvar
> microscopes to a digital camera with 1/2" format sensor

See my page:

http://www.truetex.com/micad.htm

From:	GTO
Subject:	Re: C mount adapter for Reichert Polyvar
Date:	Thu, 02 Dec 2004 00:55:08 GMT

That's a very nice collection of adapters you have listed on your web page.

Do you happen to have a male T-thread to female C-thread adapter? I have
found the female T-thread to male C-thread adapter (like the one listed from
Edmunds Optics at [1]) but not the opposite.

[1]
http://www.edmundoptics.com/US/onlinecatalog/DisplayProduct.cfm?ProductID=1827

Thanks,

Gregor

"Richard J Kinch" wrote in message
news:Xns95B29607BDC62someconundrum@216.196.97.131...
> Chris Brady writes:
>
>> Looking for a C mount adapter to interface Reichert Polyvar
>> microscopes to a digital camera with 1/2" format sensor
>
> See my page:
>
> http://www.truetex.com/micad.htm

From:	Richard J Kinch
Subject:	Re: C mount adapter for Reichert Polyvar
Date:	Wed, 01 Dec 2004 19:35:34 -0600

GTO writes:

> Do you happen to have a male T-thread to female C-thread adapter?

Sure, as a threaded bushing, similar to the item in the middle of this
photo:

http://www.truetex.com/micad19.jpg

From:	Dan Fromm
Subject:	Re: C mount adapter for Reichert Polyvar
Date:	5 Dec 2004 03:40:24 -0800

"GTO" wrote in message news:...
> That's a very nice collection of adapters you have listed on your web page.
>
> Do you happen to have a male T-thread to female C-thread adapter? I have
> found the female T-thread to male C-thread adapter (like the one listed from
> Edmunds Optics at [1]) but not the opposite.
>
> [1]
> http://www.edmundoptics.com/US/onlinecatalog/DisplayProduct.cfm?ProductID=1827
>
> Thanks,
>
> Gregor
>
> "Richard J Kinch" wrote in message
> news:Xns95B29607BDC62someconundrum@216.196.97.131...
> > Chris Brady writes:
> >
> >> Looking for a C mount adapter to interface Reichert Polyvar
> >> microscopes to a digital camera with 1/2" format sensor
> >
> > See my page:
> >
> > http://www.truetex.com/micad.htm

Edmund has a male T-to-male T ring, this will solve your problem. See
http://www.edmundoptics.com/US/onlinecatalog/displayproduct.cfm?productID=1382

From:	Richard J Kinch
Subject:	Re: C mount adapter for Reichert Polyvar
Date:	Sun, 05 Dec 2004 22:58:06 -0600

Dan Fromm writes:

>> > See my page:
>> >
>> > http://www.truetex.com/micad.htm
>
> Edmund has a male T-to-male T ring, this will solve your problem.

Stacks of off-the-shelf parts work if the extra length tolerable. A custom
adapter is needed if the length is to be minimized.

From:	GTO
Subject:	Re: C mount adapter for Reichert Polyvar
Date:	Tue, 30 Nov 2004 06:07:21 GMT

Yes. Try Diagnostic Instrument Inc. I got their 1x C-mount for a 1/2" CCD.
They wrote a useful document about microscope couplers:

http://www.scitech.com.au/scopes%20&%20accessories/accessories/pdf/diaginst/couplers.pdf

Gregor

"Chris Brady" wrote in message
news:nfGqd.47$693.6@newsfe1-gui.ntli.net...
> Looking for a C mount adapter to interface Reichert Polyvar microscopes to
> a digital camera with 1/2" format sensor
>
> Thanks
>
> Chris
>
>